Settings; Switching Operating Sound On Or Off; Turning Dvd Video Camera/Recorder; Off Automatically (Power Save) - Hitachi DZ-GX5080A Instruction Manual

|
Initial Settings
Press the MENU button, and then use I,qNI/l_t_l/,ql_l/l_l_/l_/ll to display the "Initial Setup" menu
screen. See page 48 for detailed operation procedure. Press the MENU button again to exit setting.
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
Select "On" or "Off", and
then press the I_/ll button.
On: Beep will be heard
when the power
switch is changed
over, the REC button is pressed in the Video
mode, the SLEEP/START or EJECT button
is pressed, etc.
Off: No beep is heard.
Note:
The "Beep" setting will be stored in memory even when
the DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Select "On" or "Off", and
then press the I_/11 button.
On: To engage power
save. If the DVD
video camera/
recorder is left in the recording pause status
without being operated for 5 minutes, it
will automatically turn off to prevent the
battery from discharging needlessly.
Off: To cancel power save.
Note:
• To turn the DVDvideo camera/recorder on again from
automatic off activated by the power save function,
set the power switch to "OFF", and then set it to "41",
"l_r' or "[]".
• The Power Save setting will not appear in the on-
screen information display.
• If the sleep/start standby status continues for 30
minutes,the DVD video camera/recorder will
automatically turn off regardless of the Power Save
setting,
CHANGING DISPLAY LANGUAGE (LANGUAGE)
You can change the language used to display the nrenu and information.
The following shows that English is changed to French.
1
Press )"/11 or 10_ with
the screen shown on the
right displayed: The
"Language" screen will
appear.
2
Choose "Fran_ais', and
then press I_/11.
The display will change
to French.
ni ia e u •
_ P0_r sav_ 0ff
_ En Hsh
_b)ENTER(m)RETU_N
Note:
The language setting will be stored in memory even
when the DVD video camera/recorder is turned off.
32