Rear Speaker Terminal Connections; Tips On Rear Panel Connections - Hitachi 55FX20B Operating Manual

REAR SPEAKER TERMINAL CONNECTIONS
Connect after turning the power to theTV OFF.
Press the Right Speaker red button and insert the positive (+) lead wire intothe hole nextto the button. Once the wire
is in place, pull the red button back to original position and the wire is locked into place. In the same manner, press
the Right Speaker black butto.n and insert the negative(-) lead wire. Repeat this procedure for the Left Speaker.
I_AUTION: Do notshort speaker terminals, (do notconnect a wire directlyacross any two terminals). This
I
I
could cause damage to your audio outputsor damage yourTV in other ways.
I
TO
EXTERNAL <_
SPEAKER
®
®
_AUTION:
Do not connect speakers simultaneouslyto the REAR SPEAKER terminal of the Projection
TV and an external amplifier. This could damage both the TV and the speakers. Your'iV was
designed to use 8 Ohm speakers only. Any other type may degrade the audio performance
of your entertainment system.
Im
i
!
PROJECTION TV
SPEAKER AMPLIFIER
TIPS ON REAR PANEL CONNECTIONS
The S-Video connection is provided for high performance laser discs, VCR's etc., that have this feature. Use this con-
nection in place of the standard video connection if your device has this feature.
i
If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.
Refer te the operating guide of your other electronicequipment for additional informationon connecting your hook-up
cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output
(INPUT: 1 in the example on page 11.) Refer to your VCR operating guide for more information on "line" input-output
connections.
12