Side View - HAMPTON BAY Room Air Conditioners Installation & Operation Manual

D
Sill edge Screw
1 4"
1/_
space
®
Cabinet
track
SIDE VIEW
1/4"
dow sill. Position the brackets so bolts will
rest securely on window sill (Fig. 7).
Be sure cabinet maintains an outward pitch.
Air conditioner should slant slightly down-
ward on the outside as shown by 1/2 a bub-
ble off on a carpenter's level. This outward
pitch prevents water from entering the room
(Fig. 8).
5
4. WINDOW INSTALLATION (NON FLUSH MOUNT)
Installation Other
Than Flush Mount
In order to install the unit with more of it project-
ing into the room, it will be necessary to relocate
the top retaining bar, side seals and bottom tie bar.
1. Check to make sure the cabinet's outside
side louvers will not be blocked when the
unit is moved farther into the room (Fig. 9).
2. Remove the top retainer bar, cabinet side
seals and bottom tie bar from the cabinet.
Relocate them for the desired projection into
the room (Fig. 9).
3. Using the top retaining bar and cabinet
side seals as templates, locate and drill five
(5) 7/32" mounting holes on the top of the
cabinet and three (3)on each cabinet side
(Fig. 9).
4, Use sealing material to fill the holes in the
cabinet top and sides that become exposed
when the top retaining bar and cabinet side
seals were relocated (Fig. 9).
5. Follow all preceding instructions.
D 7/32" mounting holes
Top retainer bar
Bottom tie bar
Consult your authorized dealer or importer for
alternative installation instructions.
Caution: Do not drill a hole in bottom pan. Unit is designed to operate with approximately 1/2" of water in bottom pan.