Advertisement
CHECK TIRE PRESSURE
The tires on your tractor were ovednfiated at the factory
for shipping purposes.
Correct tire pressure is important
for best cutting performance.
o
Reduce tire pressure to PSU shown in "PRODUCT
SPECIFICATIONS"
section of this manual
CHECK
MOWER
LEVELNESS
For best cutting resuUts,mower shouUd be properUy UeveUed.
See "TO LEVEL MOWER HOUSUNG" in the Service and
Adjustments section of this manual
CHECK
FOR
PROPER
POSITION
OF ALL
BELTS
See the figures that are shown for repUacing motion, mower
drive, and mower bUadedrive beUtsin the Service and Ad-
justments section of this manual
Verify that the beUtsare
routed correctUy.
CHECK
BRAKESYSTEM
After you Uearnhow to operate your tractor, check to see that
the brake is properUy adjusted. See "TO ADJUST BRAKE"
in the Service and Adjustments section of this manual.
,/CHECKLIST
BEFORE YOU OPERATE AND ENJOYYOUR NEW TRAC-
TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE
BESTPERFORMANCE
AND SATISFACTION FROM THIS
QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
v_ All assembly instructions have been completed.
v_ No remaining loose parts in carton.
v_ Battery is properly prepared and charged.
(Minimum
1 hour at 6 amps).
v_ Seat is adjusted comfortably and tightened securely.
v_ All tires are properly inflated. (For shipping purposes,
the tires were overinfiated at the factory).
v"
Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results.
(Tires must be
properly inflated for leveling).
v"
Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
v_ Check wiring. See that all connections are still secure
and wires are properly clamped.
v_ Before driving tractor, be sure freewheel control is in
drive position.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
v"
Engine oil is at proper level.
./
Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
v_ Become familiar with all controls - their location and
function. Operate them before you start the engine.
v"
Be sure brake system is in safe operating condition.
v"
It is important to purge the transmission
before oper-
ating your tractor for the first time. Follow proper start°
ing and transmission
purging instructions
(See "TO
START ENGINE" and "PURGE TRANSMISSION"
in
the Operation section of this manual).
10
Advertisement
