GE 23 Owner's Manual And Installation page 12

About the automatic icemaker.
A newly-installed refrigerator may take 12 to 24 hours to begin making ice.
Automatic Icemaker
]cemaker
Switch ]erArm
Ice Drawer
Pull the upper freezer sheff straight
out to access the icemaker. Always
be sure to replace the shelf. The
shelf can be used for storage.
The icemaker will produce seven cubes
per cycle--approximately 100-1,30 cubes
in a 24-hour pedod, depending on fleezer
comparmlent temperature, room
mmperamre, number of door openings
and other use conditions.
If the refligerator is operated before the
water connection is made to the icemake_,
set the power switch in the OFFposition.
_qlen the refligemtor has been connected
to the water suppl}; set the power switch to
the 0N position.
The icemaker will fill wifll water when it
cools to 15°F (-10°C). A newly4nstalled
reflJgemtor m W take 12 m 24 horns m
begin making ice cubes.
Throw away the first few batches of ice
to allow the water line to cleaL
Be sure nothing interferes with the sweep
of the feeler arm.
X_rhen file bin fills to file level of file feeler
arm, file icemaker will stop producing ice.
It is normal for several cubes m be joined
mgetheL
If ice is not used flequently, old ice cubes
will become cloudy, tasm stole and shrink.
Ice Drawer
Ice Storage Drawer
Toaccessice,
pull the drawer forward.
To remove the drawer, pull it smdght
out and
lift it past the stop location.
12