Controls - GE 22 Owners And Installation Manual

About the controlson the refrigerator, www.GEAppliances.co
The controls will look like one of the following:
\
/
\\\ /
Initially, set the refrigerator control at 5 and the freezer control at 5 and
allow 12hours for the temperature to stabilize.
Several adjustments may be required. Adjust the controls one increment
at a time, and allow 12hours after each adjustment for the refrigerator
to reach the temperature you have set.
Setting either or both controls to 0 stops cooling in both the refrigerator
and freezer compartments but does not shut off electrical power to
the refrigerator.
Touchpad controls
• Setting either control at 0 will automatically set the other control at O.
The zeros will blink until you set the controls.
• If both controls are set at 0 and either COLDERpad is pressed, the
controls will automatically reset to 5.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
Locking the Controls (onsome models)
This feature allows you to lock die controls
so the settings cannot be changed.
Tolock the controls:
0 Set the controls to the desired settings.
0 Press and hold the lock pad for
3 seconds.
When the controls are locked, the indicator
light will come on and the control settings
will not be displayed.
Tounlock the controls:
Press and hold the lock pad for 3 seconds.
Atker unlocking file controls, file settings
will be displayed, file lock indicator light
will go out, and the settings can be
changed.
5