FujiFilm FINEPIX HS30EXR Owner's Manual page 41

Shooting A4od_*
3 The first shot will be shown superimposed on
the view through the lens. Using it as a guide,
frame the second shot and press the shutter
release button.
• The 3D effect _
may not be vis- I_
ible with some
subjects or under
some shooting conditions. For best results, tile
distance tile camera is moved between shots
should be about 1/30th to 1/50th of the dis-
tance to tile subject.
• The camera will turn off automatically if no op-
erations performed for tile time selected for
I_1 AUTOPOWEROFF(_ 102).Thefirstshotwill
not be saved if tile second shot is not taken be-
fore the camera turns offi
ii"
ii"
ii"
ii"
ii"
Thecamera displays images in 2D. Pressthe selector
down to toggle between tile first and second shots.
Devices e quipped for 3Ddisplay, such as tile FINEPIX
REAL3D V3 digital photo frame or FINEPIX REAL3D
W3 digital camera, will display tile images in 3D.
}D printscarl be ordered from h_:p.//wwwfujihlm.
corn/3d/prin _/
Thesupplied softwaredisplays 3D anaglyph images.
3D photos carl also be viewed using other applica-
tions that support tile MP format.
3DTVS that support the MP format carl display im- _o
ages in 3D.Seetile manual for your TVfor details, o
iiiii. Images are n ot output in 3D when printed directlyii i
from the camera.
SD images are displayed in 2D in slide shows and
when output on a corwentional TV. ,_
3D images carl not be edited or retouched.
Note: The MP (Multi-Picture) format is a CIPA standard for
files containing multiple still images. Files in MP format are
referred to as "MP files" and have the extension "LMPO'. The
camera uses this format for 3D images.
21