FujiFilm FINEPIX S700 Owner's Manual page 137

Windows XP / Vista
_1 The help message appears in the bottom-right corner
of your screen. This message will close when the
settings are completed, No action is required,
CAUTION
This step is not required for subsequent connections
_2_FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears, Follow the instructions provided on screen to
save the images, To proceed without saving the
images, click the [Cancel] button
"%_ MEMO
• You call only see images saved oil a PC Save images
on a PC
• If you cancel saving by clicking the [Cancel] button, set
the Power switch to OFF to turn off the camera and then
disconnect it from the PC.
Proceed to !!Using FinePixViewer'! (_p.138),
IDisconnecting the camera I
1
Windows
Once the image has been saved, the window below
appears (Save
Image Wizard window), To disconnect
the camera, click the [Remove] button.
Macintosh
Once the image has been saved, the window below
appears, To disconnect the camera, click the [OK]
button
Continued
=
s=.
137