Table of Contents
Advertisement
/i_wing Pi :tup'ei;on a Compu er
Connectinq
the Camera
1 If the pictures you wish to copy are stored
on a memory card, insert the card into the
camera (pg. 9). If no card is inserted, pictures
will be copied from internal memory.
_- Note
Windows users may require the Windows (D
when starting the software for the first time.
Caution
Lossof power during transfer could result in loss
of data or damage to internal memory or the
memory card. Check the battery level.
2
Turn the camera offand
connect the supplied
USBcable as shown, making sure the
connectors are fully inserted. Connect the
camera directly to the computer; do not use a
USBhub or keyboard.
3
Press the []
for about a second to turn
the camera on. MyFinePix Studio or
FinePixViewer will start automatically; follow
the on-screen instructions to copy pictures
to the computer.
To exit without
copying
pictures, click Cancel.
Caution
If the software does not start automatically, it may not
be correctly installed. Disconnect the camera and
reinstall the software.
For more information on using the supplied software,
start the application and select the appropriate option
from the Help menu.
o
59
Advertisement
Table of Contents
