Cleaner Description - Hoover Turbo EmPower 4600 U5268900 Owner's Manual

Cleaner description
21
1. Folding handle 15, Hose
2. Upper handle release l& Furniture nozzle
button
17. Dusting brash
3. Power Boost Switch
18. Extension wand
4. Dirt cap latch
19. Crevice wand: stores
5. Carrying handle inside wand
6. Preofi[ter 20. Cord hooks: wrap
7. HEPA filter (inside filter cord around hooks for
chamber) storage. The top hook
8. Dirt cap (Twin Chamber) rotates to the left for
g. Dirt cap lid easy cord release.
10. Headlight 21. ONoOFFoHUSH
TM
switch: located on
11. Stair cleaning handle: front of cleaner body
located above the
headlight.
12. Hood Operate cleaner only at
13. Carpet height adjustment voltage specified on
knob: rotate knob to cot- data plate on bottom of
rect setting for height of cleaner.
carpet being cleaned.
14. Handle release pedal: This cleaner is intended
step on pedal to lower for household use.
handle to operating or low
positions.
Pe[arized plug
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not change the plug in
any way.
HOSe C@nn¢Ctt@n
Hose must be attached to cleaner base for
floor cleaning.
To attach hose, use the end of the hose to
push the cover (A) down and push hose
onto opening.
Twist hose end slightly to tighten the con-
nector.
4
O@-OFF-HUSH
TM
Hug cord into electrical outlet.
Toturn cleaner ON, push switch (B) up.
Toturn cleaner OFF, push switch to middle
position.
For quieter vacuuming, push switch to
'HUSH' (down) position.
Pat Power Boost Switch in neutral when
using ON or HUSH setting.
Power Beest Switch
Use the Power Boost Switch (C) to add
extra cleaning power for cleaning heavily
soiled areas and for picking up dry debris
spills.
Push the switch forward for a temporary
boost. When released, the boost will auto-
matica[[y go to the "neutral" position.
Push the switch back to lock it in the Boost
position. To unlock, push the switch for-
ward to the "neutral" position.
Use the lock position for larger areas or
when using the cleaning tools.
The Boost can be used with either the ON
or HUSH mode selected (see Fig. 2-3).
Pat Power Boost Switch in neutral when
using ON or HUSH setting.