Advertisement
Attach
hose
rack
[]Remove
tool and taped screw from
rack
Insert projections on rack into slots on
back of cleaner.
I_1
Slide rack down into place. Insert
screw at (D) and tighten with a
Phillips screwdriver
[]
Storing
hose & tools
Store hose on rack by first position-
g hose in front section of clip
l_Then
continue wrapping
hose as
shown snapping
end of hose con-
nector into clip.
I_
Position tool in holder at base of
cleaner and snap it into place as
shown at arrow.
m
Slide bare floor attachment
into
holder as shown.
For Plus*
or
Ultra**
models
I_The
powered hand tool** is shipped
in a plastic bag for protection.
Remove the bag before using the tool
by first opening
tool door.
alTo
remove tool** (A), pul! it down
and outward,
To reposition the tool, reverse this proce-
dure
To store stair/upholstery
nozzle* (B),
open tool door, place nozzle in bracket
and fit it securely into positiion,
To
remove, reverse this procedure.
How
to reattach
tool
cover
_The
tool cover is designed
with a
break-away
feature which allows it
to snap free if it is pushed open too far.
To reattach, atign hinges of cover with
slots on sides of tool storage area
Push cover down to secure in place,
Advertisement
