Hitachi P50H4011 Operating Manual page 26

O
INPUTS button
When the remote control is in TV mode, press this
button to access the INPUTS menu. Use the
CURSOR and SELECT buttons to scroll and select
the inputs that are being used. Pressing the
INPUTS button repeatedly will also cycle through
the Inputs menu items. Then press the SELECT
button to select.
Prog
ANALOG CHANNELS
26
INPUT 1 Select to choose INPUT 1.
INPUT 2 Select to choose INPUT 2.
INPUT 3 Select to choose INPUT 3.
INPUT-FRONT Select to choose FRONT INPUT.
HDMI 1 Select to choose HDMI 1 INPUT.
HDMI 2 Select to choose HDMI 2 INPUT.
HDMI-FRONT Select to choose FRONT HDMI INPUT.
AIR/CABLE Select between Air or Cable signal.
O
O
CLOSED CAPTIONS (CC)button
Use this button to display the dialogue, narration,
and/or sound effects of a television program or home
video which are displayed on the TV screen when
available. Your local TV program guide denotes
these programs as D or [_.
MENU button
The MENU button will start the On-Screen Display.
O
GUIDE button
[Cable Box (CBL), Satellite Receiver |SAT)/
Set-Top-Box (STB) mode only]
The use of this button is only applicable when the
remote control is in (CBL) and (SAT/STB) mode.
Press this button to access the Channel Guide of
the (CBL), and (SAT/STB).
O EXIT button
This button will exit all On-Screen Displays.
@
CURSOR buttons/SELECT button
All the On-Screen Display features can be set or
adjusted by using the CURSOR buttons and the
SELECT button, except for numeric entries. Press
the CURSOR buttons toward desired direction and
press the SELECT button to select.
O
INFO button
Press this button when you want to check the
channel being received, the picture source, if the
channel has stereo (ST) or second audio program
(SA), the time, CHANNEL ID and if the TIMER is set.
Closed
Caption setting Event timer
When an S-VIDEO Input is connected
to INPUT 1
When a Component Video: Y-PbPr
Input is connected to INPUT 3