Hitachi CP-X955E Operating Manual page 8

II ÷ II
÷
Names and functions of each part
Main unit
Speaker
Handle
LAMP indicator \
This lights when the
lamp does not light.
(See page 29) \
\
\
\
\
\
\
/ h
Cooling fan Lens / Remote control Cooling fan
sensor (in take)
(exhaust)
/
Lens cover Lever
Use the remote control transmitter within the range
of about 16 feet from the remote control sensor
and within 30 ° to both the left and right.
ON indicator
This blinks in the standby mode
and lights in the operation
mode. (See page 29)
-STANDBY / ON
button
PowerON/OFF button.
OFF sets the unit in
standby mode.
(See page 12 ~ 13)
_TEMP Indicator
This lights when
temperature inside the
projector is too high. (See
page 29)
\ MUTE button.
(Seepage9)
VIDEO input terminal
(on video-equipped models only)
S-VIDEO input terminal _
Mini DIN 4pin connector (1/2)
VIDEO input terminal
RCA Jack (1/2)
AUDIO L/R input terminal
RCA Jack (1/2)
MAIN POWER switch
Main power ON/OFF switch.
©: OFF
I:ON
/
/
/
/
f
ZOOM button
Adjusts picture size,
(See page 12)
FOCUS button
Adjusts focus. (See page 12)
MENU button
Picture adjustments.
Refer to page 14 - 18 for
details.
- RESET button
Resets unit to factory
settings. (See page 14)
INPUT button
To select the input source,
Each time this button is pressed, the input source
is changed in sequence as shown below.
RGB1 --_ RGB2 --_ VIDEO1 --_ VIDEO2
t I
AC IN socket
Connect the provided
powercord.
j RGB input terminal
RGB input terminal
D-sub 15pin shrink
terminal (1/2)
RGB output terminal
RGB output terminal
D-sub 15pin shrink
terminal
RGB output can be displayed
_even in the standby mode.
CONTROL terminal
\ D-sub 15pin shrink terminal
AUDIO output
terminal (RGBNIDEO)
Stereo mini jack
AUDIO input terminal
Stereo mini jack (1/2)
÷
8
II ÷ II