Installation - Hitachi CP-X955E Operating Manual

II
÷ II
Installation
Example of the projector and screen installation I
Determine picture size and projection distance as illustrated below.
View from the top
Screen J
/
/
bZ
_ _Viewfrom the side
\\\\
Lens center
a
÷
Screen (inch) b (inch)
a (inch)
Minimum Maximum
60 89
89 134
119 179
149 224
179 269
224 336
298 448
40 3.4
60 5.1
80 6.9
100 8.6
120 10.3
150 12.9
200 17.2
a: Distance from the projector to the screen. (+10%)
b: Length from the center of the lens to the bottom of the
picture. (+10%)
This screen size is full-screen size. (1024 dots × 768 dots)
Installation of liquid crystal projector
Please basically use liquid crystal projector at the horizontal
position.
If you use liquid crystal projector by the lens up position, the
lens down position and the side up position, this may cause the
heat inside to build up and become the cause of damage.
÷
I How to use foot adjusters
Adjust the projection position using the foot adjusters at the bottom of the projector.
View from the front
)
_ View from the side
Foot adjuster
A viewing angle of 2" ~ 12° can be changed.
I
1. Lift up the projector, unlock the foot adjusters.
2. Adjust a viewing angle, and then lock the foot adjusters complete.
3. To adjust the angle slightly, revolve the foot adjusters.
]/_Caution] Do not unlock the foot adjusters while you do not support the projector, to avoid falling of the
projector and causing an injury.
Do not revolve the foot adjusters by force, the foot adjusters is damaged.
If the foot adjusters do not lock completely, move the foot adjusters a little before locking.
11
II ÷ II