Accessories
Check
to make
sure
you
have
the following
accessories
before
disposing
of the packing
material.
(_
Remote Control Unit
_
"AA" Size
(_
Operating
CLU-4591AV
Batteries
(2)
(_
Power Cord
Guide
Part No. HL02631
PMODE &MODE
MTBISAP ASPECT
I_! [_!4
I!
b
GD GD _D
MENU
I_UT
i
=============================
HiTACHi
CLU-_IAV
HiTACHi
(_
Easy Graphic Guide
/
For optional accessories,
please access our web site at: www.hitachi.us/tv
Ceiling mounting is not recommended.
Mounting the panel on the ceiling does not provide adequate ventilation
for the electronics
or proper support for the front glass panel. This LCD television product
is designed
for a
maximum
tilting angle of 45 degrees from vertical
Please see page 8 for important information
related to waft mounting.
%
REMOTE CONTROL
BATTERY INSTALLATION
AND REPLACEMENT
The remote control operates on 2 "AA"
batteries.
1.
Open the battery cover of the remote control by pushing and sliding it in the direction of
the arrow.
2.
Insert two new "AA" size batteries for the Remote Control. When replacing old batteries,
push them towards the springs and lift them out.
3.
Match the batteries to the (+) and (-) marks in the battery compartment.
4.
Insert the bottom of the battery, the (-) side, into the battery compartment
first, push
towards the springs and insert the top of the battery, the (+) side, into place. Do not force
the battery into the battery compartment.
5.
Close the battery cover by sliding back the cover and push the cover until it clicks shut.
• Do not insert batteries
with '+' and '-' polarities
reversed
as this may cause the batteries
to swell or rupture
resulting in leakage.
• Never mix used and new batteries in the device.
• Replace all the batteries in the device at the same time.
• Remove the batteries if the remote control is not going to be used for an extended period of time.