Table of Contents
Advertisement
REAR SPEAKER
TERMINAL
CONNECTIONS
Connect after turning the power to the TV OFF.
Press the Right Speaker red button and insert the positive(+) lead wire into the hole below the button.
When the button
is released, the wire is locked into place. In the same manner, press the Right Speaker black button and insert the negative
(-) lead wire. Repeat this procedure for the Left Speaker.
,/_AUTION:
Do not short speaker terminals, (do not connect a wire directly across any two terminals).
This
could cause damage to your audio outputs or damage your TV in other ways.
TO
EXTERNAL
q_]
SPEAKER
Do not connect Speakers simultaneously to the REAR SPEAKER terminal of the Projection
TV
and an external amplifier. This could damage both the TV and the speakers.
Your TV was
designed to use 8 Ohm speakers only. Any other type may degrade the audio performance
of
your entertainment system.
C
PROJECTION TV
SPEAKER
AMPLIFIER
TIPS ON REAR PANEL CONNECTIONS
The S-Video connection is provided for high performance
laser discs, VCR's, etc., that have this feature.
Use this
connection in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.
Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up
cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output
(INPUT: 1 in the example on p. 13). Refer to your VCR operating
guide for more information
on "line"
input-output
connections.
14
Advertisement
Table of Contents
