Advertisement
On
2. Two Fan speeds
With this you can control the fan speed.
You have 2 levels of Fan Speed for you
to set at you desired Jevek LOW will
circulate air at the lower velocity and
HHGHwill circulate at the maximum.
Press"FAN" key, for each press, the fan
speed changes as follows:
Low speed--_High speed
3, Check Filter Jndlcator
The check filter indicator will flash when
filter need to be cleaned.
Remove filter; wash and replace it. (See
PS)Press"RESET"key, the check filter
indicator is off.
4° AUtOoDefrost Sensor
(Built in)
When temperature gets down to 60°F or
lower, ice may form on the evaporator
coils preventing removal of moisture_The
FROSTCONTROL stops the compressor
when this happens but allows the fan to
continue running. When the ice is no
longer present if star_sthe compresson
Be Bucket Fuji Jndlcator
When light comes on, automatic flow
central stops the unit. Turn the unit off
by pressing'_POWER ' _keybefore emptying
the bucket. (See PS)
6_ Pewer FalJure Resume Function
When the power resumes after power
failure, the unit will run automatically. AJJ
the display lights will turn on for 3 seconds
and then the unit resumes the last station
before the power failure.
7oAuto A_r-dr/
If the power is off and the unit is not
unplugged, for keeping the unit dry, the
fan will keep running
for 2 minutes every 30 minutes_
8. DigltaJ
Humldlty
DispJay
LEDdisplays the humidity of the ambient
ain The humidity range is 30%-90%.
4
Advertisement
