Advertisement
Con_troJ Panel
4. Auto=De
5. Bucket Full Hndicator
6. Power Failure Resume Function
7. Auto Airodry
8. Digital Humidity Display
Operation
Guide
After you plug in the unit it wiJJperform a seJfdest.AH the display lights will turn on for 3
seconds. The LEDdisplay wiJJread "88". Hfany display light fails to turn on you may need
service on the unit. After the 3 seconds self-test the unit wiJJautomatically go to the stand
by mode. Now all lights will be off and you will have to turn on by pressingthe "POWER"
key_ After pressing "POWER", LEDdisplays the humidity of the ambient ain LED will display
"LO" when humidity is lower than 30%, and it will display "H" when humidity is higher
than 90%.
Ht i s normal for the surrounding air to become slightly warmer as the dehumidifier operates_
This warming effect further reduces the relative humidity of the surrounding ain
1. Automatl¢
Humldistat
ControJ
This allows you to adjust the humidity of the air. You may set the humidity to 'Four
desired by pressing "<" and ">" key.
,<H Event, t ime the key is pressed, desired humidity changes as follows:
dry'
low humidity
cornfortable
middle humidify high humidity
The indicator lights turn on step by step. It will stop when in the high humidity.
">"
Everytime the key is pressed, desired humidity changes as follows:
high humidity
middle humidity
comfortable
low humidity
dry
The indicator lights turn on step by step. It wiJJstop when in the dry.
3
Advertisement
