Evolution Technologies EVOLUTION MK-425C Getting Started page 19

Evolution MK-425C/MK-449C/MK461C Getting Started
Move one of the rotary controllers and notice how the numbers in the display change,
telling you what controller number you have selected and what MIDI cc is assigned to it.
1. Press the function button (6) "CONTROL ASSIGN".
2. Type "076" on the numerical keypad (3).
Notice the display now shows 76 in large digits, the controller number you have just pro-
grammed.
Moving the controller should now control the Tube Amp Driver parameter on the B4.
You can keep going in order to create your own setups, but make sure you store to a pre-
set location before recalling any other setups, if you want to keep it.
Please note that the procedure for programming the buttons is somewhat different.
For more in-depth information about programming the MK-425C/449C/461C, please refer
to the advanced manual.
18