Recalling Presets; Sending Snap Shot - Evolution Technologies EVOLUTION MK-425C Getting Started

Evolution MK-425C/MK-449C/MK461C Getting Started

Recalling Presets

Once you have verified that your software is receiving data from the keyboard, its time to
try some of the 10 factory programmed presets.
1. Press the function key labelled "Recall" (6) .
2. Type in the number of the preset you want using the numerical keypad (3).
The following is a list of all the presets contained in the 10 memory locations.
Lets try the MK-425C/449C/461C with the Native Instruments B4. If you haven't got this
wonderful instrument installed on your system you may want to try the demo which we
have provided on the Evolution Installer CD-ROM.
1. Press the function key labelled "Recall".
2. Type "02" on the numerical keypad.
3. Launch the B4.
4. Make sure the B4 is receiving data from the keyboard.
5. Click on the B4 logo at the top right corner of the window to switch from the
'Keyboard View' to the 'Control View'.

Sending Snap Shot

With the B4 still active, send out a snap shot:
Press the +/- buttons (4) together to send a SNAP SHOT of the
current controller assignments and their values.
When you send a snapshot, the LCD will display the SNAPSHOT symbol.
The data for an individual controller will be sent on which ever channel that
controller has been assigned to.
Pressing Snap Shot in the above example using the B4, should therefore
result in the changing of the parameters on the B4 control panel
Snap Shot is one way of synchronizing the receiving device with the faders
and rotary controllers on your keyboard. The function can also be used as a
creative tool, with interesting and surprising results.
Preset
01 GM Preset
02 B4
03 Pro-53
04 Reason Native
05 Model-E
Preset
06 PPGWave2V
07 Lounge Lizard
08 G-Media Oddity
09 SoundBlaster Synth
10 XG/GS Preset
14