Lenovo ThinkPad Z61e Hardware Maintenance Manual page 105

Step Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (2)
Turn over the system board, and then disconnect the PC Card/ExpressCard slots
assembly from the system board.
When installing:
1. Make sure that the connector of PC Card/ExpressCard slots assembly is
attached to the system board firmly.
2. When you attach the system board to the base cover, make sure that the
wireless switch on the system board and the plastic housing in the base cover
are in the same position (L or R). The wireless switch is fragile and might be
damaged by the pushing force of the system board into the base cover.
Removing and replacing a FRU
1
1
2
ThinkPad Z61e, Z61m, and Z61p
Color Torque
Silver 0.196 Nm
(2.0 kgfcm)
99