GE ASTD5 Owner's Manual And Installation Instructions page 14

WindowInstallation Instructions.
Install the Air Conditioner in the Window
] Cut _e window sash seal to _e window
width and stick the adhesive side to the
bottom of the sash.
] Extend the left and right accordion panels to
the vertical window sashes and attach with
4 type B screws. Attach the top mounting rail
to the sash with a )'pe B screw.
Window sashsen
Type8 screw
] Place the air conditioner on the stool with
the bottom mounting rail against its back
edge. Center it and close the window
securely behind the mp mounting rail.
It should be level or slightly tilted to the
outside. Use a level; about a 1/3 bubble
will be the correct case slant to the outside.
TypeB
SC[eWS
screws
TypeB
/
SCreW
Attach the brackets to the stool on both
sides using two type B screws.
Install the Security Bracket and the Foam Top Window Gasket
[] Attach a security bracket _ a [_)e B scre_
I
[]Cut the foam top window gasket to the
window width.
[] Stuffthe foam between the glass and the
window to prevent air and insects fi'om getting
into dm room.
_12qeinstallation is now complete.
14