Features - GE Profile PTWN8050M0WW Owner's Manual And Installation Instructions

About the washer features.
NOTE: Features
may not be available on all washer models.
MY CYCLE
To save a favorite cgcle, set the desired
settings for wash cgcle,soil level,spin speed
and wash temp settings and hold down the
MY CYCLEbutton for 3 seconds. A beep will
sound to indicate the cgcle has been saved.
To use gour custom cgcle, press the
AtYCYCLEbutton before washing a load.
To change the saved cgcle, set the desired
settings and hold down the MY CYCLEbutton
for 3 seconds.
NOTE:When using MYCYCLE wash options
cannot be modified after the cycle has been
started.
NOTE:Ifyou change wash options with
MYCYCLEbefore starting the cycle the
MYCYCLElight will turn off and you will
be retumed to the base cycle.
Signal
Alerts gou that the cgcle is complete.
The clothes should be removed when the
beeper goes off so wrinkles don't set in.
Press SIGNAL to select low or high volume,
or to turn the beeper off.
The beeper will continue to sound everg
2 minutes (maximum of 4 times).
0IS°AK )
Lock
You can lock the controls to prevent ang
selections from being made. Or gou can lock
the controls after gou have started a cgcle.
Children cannot accidentally start the
washer by touching pads with this option
selected.
To lock the washer, press the LOCKbutton. To
unlock the washer, press and hold the LOCK
button for 3 seconds.
When the lock function is enabled, the red
lock icon will appear in the upper displag.
Soak
Soak isan extra wash before the main wash.
Use it for heavilg soiled clothes or for clothes
with a care label that recommends soaking
before washing.
Be sure to add high-efficiency detergent, or
the proper wash additive to the soak
dispenser.
Extra Rinse
NOTES:
, When selecting soak, it is recommended
to use powder detergent in the main wash
(detergent) compartment.
. The maximum soak time is 3 hours.
Use
an extra rinse when additional rinsing is
desired to remove excess dirt and detergent
from soiled loads.
6
f DELAY ]
0 L
START
J
f FABRIC
]
0 LSOFENER J
Delay Start
You can delag the start of a wash cgcle
for up to 24 hours. Pressthe DELAYSTART
button to choose the number of hours gou
want to delag the start of the cgcle,then
press the START button. The machine will
count down and start automaticallg at the
correct time.
NOTE:Ifyou open the lid when the delay
is counting down, the machine will enter the
pause state. You must close the lid and press
STARTagain in order to restart the countdown.
Fabric Softener
Select FABRICSOFTENER button to change
the final rinse tgpe from sprag rinse, to deep
rinse. This works best when used with liquid
fabric softener. Fabric softener is displaged
during the final rinse.
NOTES:
.
For best performance with
COLORS/NORMAL,or WHITES/HEAVY
DUTY select fabric softener or extra rinse.
. If extra rinse is selected instead of fabric
softener, fabric softener will be displayed
during the extra rinse cycle.