Stacking Instructions - GE Spacemaker DSXH43 Owner's Manual & Installation Instructions

Stacking Instructions
WARNING:
• To reduce file risk of electric shock, disconnect fllis
appliance flom the power supply before attempting
any tlseI illaintenance.
Turning file conuols
to
the
OFF position does not disconnect this appliance
flom the power supply.
• Refer m die washer and dITer installation insuucfions
prior m stocking appliances. Reading all of tile
information contained in these insmlcfions will simplify
the installation and ensure a correct and sJe operation.
A fire hazard and/or personal i_,jtnT could result flom
improper installation.
TOOLS REQUIRED FOR STACKING
THE DRYER
• Phillips head screwdriver
• Ghannelqock adjustable pliers
MOUNTING THE DRYER TO
THE WASHER
Thenumbers in the illustration correspond to steps.
1. Remove file washer mp panel by first removing file 4
screws in die 2 brackets
located on die top rear of die
washeI;
Slide the mp forward, lift die flont of die top up and
remove the mp panel.
Remove
die 2 brackets
flora die rear of die top panel.
2. Using file 4 screws fllat were removed in stop 1, install
die brackets in die rear support as shown.
3. Remove die 4 screws and die 2 long flont brackets
located on die top flont of die washeL
4. Install die 2 new flont mounting brackets provided and
the 4 screws that were removed in stop 3. Nora that the
tab of the flont mounting bracket is facing forward as
shown in the illusm_fion.
19