Dispenser Cups; Problem Solver - GE GSD700 Use And Care Manual

Table of Contents

Advertisement

QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
DISHWASHER
WON'T
RUN
UNUSUAL
NOISE
DISHES
DON'T DRY
UNCLEAN
DISHES
AND FLATWARE
DETERGENT
LEFT
IN DISPENSER
CUPS
DETERGENT
CUP
LID WON'T
LATCH
AFTER
ADDING
DETERGENT
YELLOW
OR
BROWN- FILM
POSSIBI,E
CAUSE
A fuse in your home may be blown, or the circuit breaker tripped. Replace fuse or
reset circuit breaker. Remove any other appliances
from the circuit.
Utensils
may not be secure
on rack pins,
or something
small
may have dropped
from
the rack. Water
is causing
utensils
to rattle. Make
sure
everything
is securely
placed
in dishwasher.
Make
sure inlet water
temperature
is correct.
(See How
to Test Water
Temperature
section).
Unload
the bottom
rack first. Water
from
dishes
in the top rack may be spilling
into
the bottom
rack.
Check
for improper
loading. Dishes shouldn't
nest together. Avoid overloading.
Check the rinse agent dispenser to see that it's not empty.
Check inlet water temperature.
It should be al least 120°F. (To test, see How to Test
Water Temperature
section).
Water pressure
may be temporarily
low. Turn on a faucet. Is water coming out slower
than usual'? If so, wait until pressure is normal before using your dishwasher.
Plugged
air gap. (See Care and Cleaning
section).
Improper
rack loading. (See Loading section).
Choose another cycle to give you longer washing
time.
Water may not be reaching
the detergent
cups. Move dishes that may be blocking
detergent
cup.
The dispenser
cover may not be opening or may be blocked
by improperly
loaded
items. If you used a powder detergent,
open the cup and remove any caked-on
detergent.
If the cup still doesn't
open automatically,
call for service.
Detergent
may be old. If the powder detergent
is hard or caked in the box, throw it
away. The detergent
may not be working well. Try another brand.
Cycle Indicator
Dial must be OFF for cup lid to close and latch properly.
If you
unlatch
the door and open it to d_ T your dishes, the Cycle Indicator
Dial does
not advance by itself.
Tea or coffee can stain cups. Remove the stain by hand, using a solution ot' 1/2 cup
bleach and 3 cups warm water.
An overall yellow or brown film on dishes or glassware
can be caused by iron
deposits
in water. A special filter in the water supply line is the only way to correct
this problem. Your water softener company can tell you about the filter.
Yellow film on sterling silver results when you wash copper mensils in the same load.
Silver polish will usually remove this stain.
CYCLE AND OPTION
This is normal. Unlatch
the door to turn off the lights.
INDICATOR
LIGHTS
STAY ON WHEN
CYCLE
IS COMPLETED
(co_tli_ltt_'d
ttc.rl
])aRc)
13
gl

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsd730

Table of Contents