GE GSD3400 series Owner's Manual page 23

Possible Causes
Dishes don't dry Low inlet water
temperature
What To Do
Make sure inlet water
temperature is correct
(see page 12).
Select HI TEMPRINSE
m-z(l/or HEATED DRY.
Che_k tlle rinse agent
dispenser.
(;all tor service,
Replace tilse or reset
circuit breaker. Remove
any other appliances fl'om
the cir_alit.
Tx) resetting the
START/RESETpad.
Control panel
responded to inputs
but dishwasher never
filled with water
Rinse agent dispenser
is empty
Door latch may not be
properly seated
Dishwasherwon'trun
Fuse is blown, orthe
circuit breaker tripped
Steam This is normal
Saoitized lightdoes
not illuminateat tire
eodof tirecycle
The door was opened
and the cycle was
interrupted during or
after the main wash
portion
Steam comes darough
the vent by tl_e door latch
during dI) ing and when
water is being pumped out,
I)o not interrupt the c}_le
an} dine during or after
main _vzsh.
The incomingwater P, a ise the water heater
temperature was too low temperature to 120%.
i_iiiiik J,!,iiiiiii/i
iiiiiiiii iii!
23