Safety Instructions - GE PP989 Owner's Manual & Installation Instructions

llnstallation
I Radiant
nstructlons Downdraft Cooktop
If you hove questions, call 800.GE.CARES (800.432.2737) or visit our Website at: ge.com
I
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
•IMPORTANT - Save these
instructions
for local inspector's use.
•IMPORTANT - Observe all
governing
codes and ordinances.
• Note to Installer - Be sure to leavethese
instructions with the Consumer.
• Note to Consumer - Keep these instructions for
future reference.
• Unless verg knowledgeable in the installation of
this product, engage o professional installer.
• Proper installation is the responsibilitg of the
installer.
• Product failure due to improper installation is not
covered under the Worrontg.
-&WARNING - Before
beginning
the
installation, switchpower offat the service
panel and lockthe service disconnecting means
to prevent power from being switchedon
accidentallg. When the service disconnecting
means cannot be locked, securelyfasteno
prominent warning device, such as o tog,to
the service panel.
IMPORTANT SAFETY INSTRUCTIONS
-_ WARNING
- TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
[] Installation work and electrical wiring must be
done bg qualified person(s)in accordance with
all applicable codes and standards, including
fire-rated construction.
r_
E]
Sufficient air is needed for proper combustion
and exhausting of gases through the flue
(chimneLl) of fuel burning equipment to
prevent back drafting. Follow the heating
equipment manufacturer's guidelines and
safetg standards such as those published %1
the National Fire Protection Association (NFPA),
and the American SocietLl for Heating,
Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities.
When cutting or drilling into wall or ceiling, do
not damage electrical wiring and other hidden
utilities.
r_l Ducted fans must alwags be vented to the
outdoors.
° This unit must be properly grounded.
_4L WARNING - ToREDUCE THE RISK O F
FIRE, USE ONLY METAL DUCTWORK.
13