GE TFH22PRXAAA Owner's Manual page 7

When YourRefrigerator Is First Plugged in
All panel lights come on fi)r fixe seconds,
a beep sounds, and lights go oftex(ept as
folh)ws:
;;;;;;_, PF flashes in the display Tou( h SYSTEM
CHECK-RESETu) eraseit.
;;;;;;_;NORMALglows.
WARM TEMPghrws until dm refiigeramr
tools down. It goes offwhen proper food-
keeping temperature is real bed.
;_ Door alarm beeper is activated and DOOR
ALARM glows.
_ CRUSHED ICE glows.
_ DOOROPENflashes if either door is open,
goes out when doors are shut.
:, Night light in ice and water dispenser
is oft.
How to Set the Door Alarm
To set fl_e alarm press DOORALARMuntilit
glows.
The conUol beeps if eidmr door is open fin.
more than 30 se( onds.
The light goes out and the beeping su)ps
when you close tile door.
Why the WARM TEMP Light Glows
At first, it's probably because your newly-
installed refligerator hasn't completely
cooled down yet. Wait a iew hours fi)r it to
cool, and titan dm liglu xdll go out.
From then on, WARM TEMP will glo_
whenex er temperatures inside get too high
fin proper tbod storage. If this happens,
open the doors only x_ben absolutely
necessmy, and close fl_em as quickly as
possible.
As soon as inside temperatures return u)
normal, tl_e light goes out.
If WARM TEMP reappears and st;0,s on fin.
hmger than 4 horns, call for service.
Z
i_ ii
How the Monitor and Diagnostic System Works
The diagnostic code flashes and tile conuol
beeps when something stuns u) go wrong.
If more titan one coded flm(tion requires
attention at the same time, the one widl tile
highest priority will be displayed first
Pressing SYSTEMCHECK-RESET_dll erase
two (;odes immediatel}_PFand CLTile dE
and FFcodes can only be erased by pressing
SYSTEMCHECK-RESELalerthe condition
tllat caused tile (;ode to flash has been
(orrected.
SYSTEMCHECK-RESETx_ll also exaluate
all oflmr coded flmcfions. If NORMALis
lit during tim displa?4ng of a code, fllat
tim( Lion is operating properly•
7