Care And Cleaning; Control Knobs; Porcelain Enamel Cooktop; Shipping Film And Tape - GE JGP970 Owner's Manual

Care and cleaning of the cooktop.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
How to Remove Protective Shipping Film and Packaging Tape
(_arefully grasp a corner of tile protective
shiI_ping film with your finge_ and slowly
peel it fl'om tile appliance surfi_ce. Do
not use any shaq) items to remove tile
film. Remove all of tile fihn befi)re using
tile appliance fin" tile fi_t time.
To assm'e no damage is done to tile finish
of tile product, tile satest way to remove
the adhesive left fl'om packaging tape on
new appliances is an application of a
household liquid dishwashing dem_gent.
Apply _dth a soft doth and allow to soak.
NOTE" Theadhesivemust be removed from
afl parts before usbg the cooktop. It cannot be
removed if it is baked on.
©
Pull the knob straight up off the stem.
Control Knobs
Tile control knobs may be removed fin.
easier cleaning.
Make sure the knobsare in the OFFpositions and
puff them straight off the stems for c/eanlbg.
Tile knobs can be deaned in a dishwasher
or tile}' may also be washed with soap and
water: Make sine tile insides ot tile ka_ol>
are (hT befi)re replacing.
Replace the knobs in the OFFposition
to ensm'e proper placement.
Porcelain Enamel Cooktop (onsome models)
The porcelain enamel finish is sturdy but
breakable if misused. This finish is acid-
resistant. However; anv acidic foods
spilled (such as ti'uitjuices, tomato or
vinegar) should not be pemfitted to
remain on tile finish.
If acidsspillon thecooktopwhileit ishot, usea
d_hPaper towelor clothto wipeit upWht away
en thesurface hascooled, w ashwithan all-
purpose cleanerandwater Rinsewell
For other spills such as tilt spatterings,
wash with soap and water or an all-l)mpose
deaner after the sm_i_ce has c_oled. Rinse
well. Polish with a (hw cloth.
Stainless Steel Cleanbg Polish
and Conditioner,please call our
to/!-freenumber:
i
_GEAppliances.com
CERAMABRYTE _
StainlessSteel Cleaning
PolishandConditioner
Stainless Steel Surfaces (onsome models)
Do not use steel-wool pads or abrasive
deaners; they will scratch the surface.
V_ Shake CEI_4A BRYTE '_bottle well.
[] Place a small amo/mt of CEIL_dMA
BRYTE _'Stainless Steel (:leaning
Polish and Conditioner on a dry
cloth. Follow tile instructions on
tile bottle.
[] Clean a small area (approximatel} 8"
x 8%,, rubbino_ with tile ,grain of tile
stainless steel if applicable.
[] Dr)and buff with a clean, oh')
soft cloth.
] Repeat as
ilecessar_i
9