Brother P-touch 1400 User Manual page 47

Specifying if the PERSONAL symbol category is
continually updated
You can specify whether symbols continue to be added to the PERSONAL symbol category
(with the older symbols deleted) when the category becomes full (ON) or symbols are no longer
added after the PERSONAL symbol category becomes full (OFF). (The default setting is ON.)
l[_ Press G_), then _.
0 Press _ or [_ until SYMBOL SAVE is displayed.
0 Press _n,o or _ until the desired setting is displayed, and then press _.
Changing the units of measure
The units usecl for displaying measurements can be set to millimeters (ram) or inches
(inch). (The default setting is inch.)
O Press (_, then D.
O Press (5_ or {_2) until UNITS is displayed.
Press _n,o or _
until tile desired
setting is displayed,
and then press
_.
Changing the language
The hmguage of the menus, settings and messages can be changed by selecting
ENGLISH or FRANCAIS. (The default setting is ENGLISH.)
_[_ Press (_, then D.
Press _ or _ "
[_ until LANGUAGE is displayed.
Press _n,o or _ until tile desired setting is displayed, _|nd then press _.
Displaying version information
This function can be used to display the version information for the P-touch software
and built-in symbol set.
_[_ Press (_, then D.
O Press _ or [_ until VERSION INFO is displayed.
Press _n,o or _ until the desired version in%rmation is displayed.
New Block
Press (_) to exit Setup mode.
39