Brother P-touch 1400 User Manual page 19

Labels printed using this Label Type mode can be wrapped
armmd cable or wire with the ends stuck together to form a
flag. With the FLAG Label Type mode, each block of text is
printed at both ends of separate labels. The length of the
unprinted part of this label is equal to tile circumference of
the cable or wire. In addition the text can be printed
horizontally or rotated 90 °.
ROTATE
set to
OFF
ABC ABC
159 159
Flag Flag Flag
length diameter length
ROTATE @
set to
ON
Fldg Fldg Flag
length diameter length
• FLAG LEN (flag length):
• FRAME:
• ROTATE:
After selecting the FLAG Label Type mode, specify the length and dialneter of the flag,
a frame style if desired, and whether or not to rotate the text.
•FLAGO (flag diameter): 0.00" to 4.00" (0 to 100 ram)
Default: 0.25" (7 mm)
0.40" to 8.00" (10 to 200 ram)
Default: 1.20" (30 ram)
OFF, FTq, FT-'I, (3Z), (35)
Default: OFF
OFF, ON
Default: OFF
_, Asingleb!ock0ftextcancontalnamaximumof7text!ine s.
_,s For labels to be attached to canes and wires, we recommend using Flexible ID Tape.
To wrap Flexible ID Tape around cylindrical objects, use the FLAG Labd Type
.... " 3 " "
mode when the dmmeter ofthe object ls less than !18 (, rrun). !naddlt!on, the flag
length should be at least 3116"(5 mm).
11