GE ASR05 Owner's Manual And Installation Instructions page 12

Installation Instructions
[] WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
[3===13
12%" min.
< J=
22" to 36"
(With accordion panels)
-I
< J=
17 W16" min.
(Without accordion panels)
[] STORM WINDOW
REQUIREMENTS
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES-
WIDTH: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
1/2" higher
than flame A
T
Stool
Storm
window
fra me
[] PREPARE AIR CONDITIONER
[] Remove the backing from the top
mounting rail seal strip and attach it to
the bottom of the top mounting rail.
[] Install the top mounting rail with 3 type A
screws from the outside of the case.
Bottom
mounting rail
Top mounting
rail._ _ _
i i
[] Loosen the lower screw on each side of
the case and hook a security bracket on
each side.Tighten the screws to secure
the brackets in place.
Security
bracket
Security
bracket
12