Installing A J-Model In An Existing Wall Case - GE AJES12DCAM1 Owner's Manual And Installation Instructions

Installing a J-Model in an existing wall case.
Read these instructions completely and carefully.
IMPORTANT!
GE strongly recommends the removal of the old
wall case and the installation of a new GE Wall
Case. If you decide to keep the existing wall
case, you may need a kitto ensure proper
performance. If you DO NOT use a kit, you
run the risk of poor performance or product
failure. This is not covered under the terms
of the GE warran_
J-Model OualifyingOuestions
J-model air conditioners may fit in existing wall
cases. However, they often need a kit to properly
adapt the case to the GE air conditioner. Answer
these questions and see the chart below for the
proper kit.
] Whatbrendair conditioner will you be
replacing?
] What are the dimensions ofthe wall case
currently in use?
[]
What is the model number of the chassis
currently in use? What is the model (or Type)
number of the wall case currently in use?
Frequently, the J-model adapter kit xfill apply
to another brand model "series" or spedfic
vintage. In these cases, you need the chassis
model number and/or the wall case or "type"
number to co_tiirm the use of the correct
adnpter kit.
Whattypeof outdoorgrille is usedwith the
I,.,I currentwall case?
There may be an architectural grille attached
to a wall case to enhance the exterior
appemance (ff the buiMing. Custom grilles
may be used with J-model w;dl cases pr_)vided
a J-model adapter kit is also used _) ensure
proper airflow.
10