Table of Contents
Advertisement
Installation 9
The location should not be protected
from the wind, nor particularly exposed
and it should not be exposed to direct
sunlight. The device must be at least 1 m
away from any opening in the outer wall,
from which warm air can either continu-
1/3
ously or occasionally issue.
It can be installed either in or on the
wall, depending on the accessibility of
2/3
the location.
N, NW (optional)
Fig. 9.2 Installation location of the VRC 693
outdoor sensor
31
Installation Manual for VRC 400 weather compensator
Hide quick links:
Advertisement
Table of Contents
