Jensen VM9512HD Installation And Operation Manual page 23

Mobile multimedia receiver
Hide thumbs Also See for VM9512HD:
Table of Contents

Advertisement

VM9512HD
Bluetooth Sub-menu Features
Setting
Options
Function
Bluetooth
On
Enable Bluetooth function.
Off
Disable Bluetooth function.
Auto Answer
On
The unit automatically answers all
incoming calls.
Off
Manually answer calls by touching
the "call" button.
Connect
Manual
Connect the last active mobile
phone by touching the CONNECT
icon when disconnected.
Auto
Automatically connect when your
paired phone is in range.
Pairing Code
The default code is "1234". Touch
the keypad icon to open the keypad
and enter the pairing code or pass
key required for Bluetooth connec-
tion to your mobile phone. Not all
phones/devices require a pairing
code. The default code is "0000" for
many models.
Tuner Region Sub-menu Features
Setting
Options
Function
Tuner
Region 1
FM Band: 87.6MHz -
Region
107.9MHz, channel separation
UK
@ 100kHz
Europe
Russia
AM Band: 531kHz - 1602kHz,
Africa
channel separation @ 9kHz
Region 2
FM Band: 87.9MHz -
107.9MHz, channel separation
USA
@ 200kHz
Canada
Mexico
AM Band: 530kHz - 1710kHz,
South
channel separation @ 10kHz
America
Rating Sub-menu Features
The DVD system has a built-in parental lock feature to
prevent unauthorized persons from viewing restricted disc
content. By default, the rating system is set at the highest
setting (with no restrictions). The parental lock is released
only by entering the correct password. Once the password is
entered, rating is available for setup.
Setting
Options
Function
Password
_ _ _ _ _ _
Enter the default six-digit password
(012345).
Rating
1. Kid Safe
Select the appropriate rating level
for the intended audience.
2. G
You may override higher ratings by
3. PG
using your password.
4. PG-13
5. PG-R
6. R
7. NC-17
8. Adult
Load Factory
Reset
Select "Reset" to restore the factory
default settings for the Rating sys-
tem only.
To reset the password, access the "RATING" menu and enter
the current password. Once the correct password is entered,
you can access the "Password" field and enter a new one.
NOTE: Record the password and keep it in a safe place
for future reference. The rating for each disc is marked
on the disc, disc packing, or documentation. If the rating
is not available on the disc, the parental lock feature is
unavailable. Some discs restrict only portions of the disc
and the appropriate content will play. For details, please
refer to the disc description.
Demo Sub-Menu Features
You can stop/run demonstration mode or turn Demo Auto
Run on/off by chooing the "Demo" option from the SETUP
MENU.
When "Demo Auto Run" is Off, you can select "Demo Mode >
Run" to start Demo Mode. Demo Mode scrolls through the
various source screens, simulating activity on the display.
"Demo Mode" is discreetly displayed in yellow text (below the
clock), to indicate the unit is in Demo Mode. To stop Demo
Mode, press the upper-left quadrant of the TFT (Source
select).
When "Demo Auto Run" is On, the unit will automatically
display Demo Mode when powered on.
19
Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, and
the TFT monitor is retracted inside the unit, the TFT monitor
automatically moves into the viewing position and Camera
mode is selected upon shifting into REVERSE gear. When
shifting into DRIVE gear, the TFT monitor is retracted back
inside unit after ten seconds.
Setting
Options
Function
Camera In
Normal
Mirror
Reverse the camera image as if
looking through a rear-view mirror.
TFT Auto
Auto
The TFT panel automatically opens
Open
when the unit is turned on.
Manual
When the ignition is turned OFF, the
TFT panel DOES NOT retract if it
was previously out
Off
You must press the OPEN button
(1) to open the TFT panel.
TFT Set Back
Off
TFT screen remains fully extended.
On
TFT screen moves back slightly
after opening.
Auto Dimmer
Off
TFT screen brightness remains
constant unless manually adjusted.
On
TFT screen will automatically dim
when less light is available.
If the monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor return to its original input
mode.

Advertisement

Table of Contents
loading

Table of Contents