Cleaning - Philips NORELCO 6955XL User Manual

ENGLISH
14

Cleaning

Replace razor head assembly.
Once a week: Razor
◗ Always clean your razor after each use.
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head assembly
while motor is on.
◗ Do not apply pressure to shaving head combs.
Do not touch razor heads with hard objects
as this may dent or damage precision-made
slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Do not use abrasives, scourers or aggressive
liquids such as gasoline or acetone to clean
the razor.
C
Clean the top of the razor with the
1
supplied brush.
C
Press the Razor Head Release Button (1)
2
and remove Razor Head Assembly from
the razor unit (2).
C
Brush out hairs from the inside of Razor
3
Head Assembly and hair chamber.
C
Replace the Razor Head Assembly back on
4
razor .
Every Two Months: Razor Head
Do not mix up the cutters and combs as the
shaving performance may be adversely affected for
several weeks before optimal shaving performance
is restored.
Turn razor to OFF (O) position and
1
disconnect from outlet.
C
2 Press the Razor Head Release Button (1)
and remove Razor Head Assembly from
the razor unit (2).
C
Brush the inside of the razor housing.
3
Turn Razor Head Assembly over so that
4
underside is exposed.
C
Turn wheel of frame counterclockwise.
5
Remove the frame and brush clean.
6
ENGLISH
15 15