Hitachi DZ-HS301E Instruction Manual page 147

When the DVD video camera/recorder is connected to PC:
Symptom
No drive icon appears
on PC.
Error occurs in playback
of DVD video camera/
recorder on PC.
Application is not
normally run on PC.
Transfer of images
stops.
DVD drive built into PC
cannot be used after the
provided software has
been installed.
Error appears when
starting ImageMixer 3.
Movies are not
recognised by
application in PC.
The DISC EJECT
button is not valid when
the DVD video camera/
recorder is connected to
PC.
No sound is heard when
an MPEG file imported
into Macintosh is played
back on Quick Time
with an MPEG 2
playback component
adopted.
When the time stamp of
file in DVD-RAM is
viewed on PC, it is
different from the actual
recording time.
Cause and Correction
The DVD video camera/recorder is not turned on.
Check the power supply.
Turn PC off and then disconnect the PC connection cable. Turn
PC on again, and then use the PC connection cable to connect
the DVD video camera/recorder to PC.
Make sure the PC connection cable is completely plugged into
this DVD video camera/recorder.
If error occurs with USB connection, the transfer rate is not
sufficient. It is recommended that you use a USB terminal
conforming to USB2.0 when connecting the DVD video camera/
recorder.
Turn the PC and DVD video camera/recorder off, and try again.
Connect the DVD video camera/recorder to another USB terminal
of PC. If your PC is a desktop type, it is recommended that you
use USB terminal on the back of PC. If you are using USB2.0
extended card, it is also recommended that you install the newest
version driver provided by each USB2.0 card maker.
Is disc scratched or does dirt or fingerprint adhere to it?
Clean the disc.
This problem may be solved if you update the DVD editing/
creating software of your PC.
Make sure that your PC display adapter (video card) conforms to
®
DirectX 9.0c.
Make sure the power switch of this DVD video camera/recorder is
set to "HDD" or "DVD".
While the DVD video camera/recorder is connected to PC, use
Explorer to right-click the DVD video camera/recorder drive icon
and execute "Eject".
Since an MPEG file imported into Macintosh using Pixe VRF
Browser EX uses the audio format of AC3 audio, no audio will be
played back even if the Quick Time MPEG-2 playback component
is introduced: Only video will be played back. Use ImageMixer
VCD/DVD2 for playback.
The file system of this DVD video camera/recorder is operated on
Greenwich Mean Time (GMT), and time lag information has not
been set. With Windows
file viewed on Explorer looks different from the actual recording
time. The actual recording time will appear for date/time
indication on playback screen.
®
as of January, 2006, the time stamp of
Reference
page
34
—
—
117
—
—
12
—
117
34
122
133
—
147