Routing Presets - Focusrite Scarlett 18i6 User Manual

Routing presets

Routing presets are provided as a starting point for the creation of routing and mixer set-ups.
Clear
This turns off all output routing. This can be used to reset the routing for the complete restart of a configuration, meaning that there is
no requirement to manually reset the routing.
DAW Tracking
'DAW Tracking' is used for the initial recording process. It will automatically output DAW 1 and 2 to be sent to all line outputs, the main
monitors (1+2) and headphones. All input channels must therefore be monitored from within the DAW application.
Zero Latency Tracking
Zero Latency Tracking is used for the recording process. It will automatically output Mix 1 and 2 to all the line outputs, routing to the
main monitors and to the headphones simultaneously. Line inputs and DAW outputs must be set up in Mix 1 so that the monitor
sources can be monitored with zero latency. It is important that the same signals are not monitored from within the DAW at the same
time, otherwise the same signal will be monitored twice (once direct from Scarlett MixControl AND a second time (with latency) from
the DAW.)
17