Install Vented Range Hood - KitchenAid KICU460WSS0 Installation & Use Manual

3. Slide the upper chimney cover over the chimney support and
attach to the top of the support using two screws provided.
A
B
C
A. Upper chimney cover
B. Lower chimney cover
C. Screw
4. Slide the lower chimney cover over the chimney support and
the upper cover. Attach to the bottom of the support using
the 2 screws provided.
Chimney Extension Kit Installation (optional)
1. Remove the plastic covering from the chimney covers.
2. Discard the upper chimney cover supplied with the hood.
3. Slide the chimney cover provided with the extension kit over
the lower chimney support and extension frame and secure
to the top of the extension frame using the 2 screws
provided.
A
B
C
A
A. Screw
B. Upper chimney extension cover
C. Lower chimney extension cover
4. Slide lower chimney cover over the chimney support and
extension chimney cover and attach to the bottom of the
support using the 2 screws provided.
A. Chimney extension kit assembled to hood
assembly with chimney covers attached
1. Using two or more people, lift the hood up against the
2. From the underside of the hood, plug control cables together
3. Insert each connected cable into a black plastic connector
4. Place the top half of the connector box over the bottom half
A
5. Using the 2 longer screws provided for each box, attach the

Install Vented Range Hood

chimney support and attach canopy to the chimney support
using the 4 hex washer head bolts provided. Tighten bolts
securely.
A. Chimney support
B. Hood
C. Hex washer head bolts
as shown.
box half.
of the connector box and screw the 2 halves together using
the 4 screws provided for each connector box.
A
B
B
A. Screws
B. Connector box half
assembled connector boxes to the metal flange.
9