Front And Rear Wheel Bearings; Appearance Care And Protection From Corrosion - Chrysler 300 Owner's Manual

446 MAINTAINING YOUR VEHICLE
Fluid Changes
Refer to the "Maintenance Schedule" in Section 8 of this
manual for the recommended transfer case fluid change
intervals.

Front and Rear Wheel Bearings

Front and rear wheel bearings are permanently sealed.
No regular maintenance is required for these compo-
nents.

Appearance Care and Protection from Corrosion

Protection of Body and Paint from Corrosion
Vehicle body care requirements vary according to geo-
graphic locations and usage. Chemicals that make roads
passable in snow and ice, and chemicals that are sprayed
on trees and road surfaces during other seasons, are
highly corrosive to the metal in your vehicle. Outside
parking, which exposes your vehicle to airborne contami-
nants, road surfaces on which the vehicle is operated,
extreme hot or cold weather and other extreme condi-
tions will have an adverse effect on paint, metal trim, and
underbody protection.
The following maintenance recommendations will enable
you to obtain maximum benefit from the corrosion
resistance built into your vehicle.
What Causes Corrosion?
Corrosion is the result of deterioration or removal of
paint and protective coatings from your vehicle.
The most common causes are:
• Road salt, dirt, and moisture accumulation.
• Stone and gravel impact.
• Insects, tree sap, and tar.
• Salt in the air near seacoast localities.
• Atmospheric fallout/industrial pollutants.