Call Overview - EverFocus 920 Instruction Manual

7.

Call Overview

This chapter will give you basic details on how to setup the CALL MENU on the DVR. Press
the CALL key and the CALL MENU will pop up as below.
In CALL MENU, you can do the following settings for the selected monitor:
1. SEQ: Sequence display on the call monitor. Press SEQ key or Middle wheel of mouse to
switch the sequence status "ON" or "OFF".
2. OSD: Channel name display on the call monitor. Press DISPLAY key or right click the
mouse to switch the OSD status "ON" or "OFF".
3. CAMERA: The current display camera in the call monitor. Press Channel NO or slide
wheel of mouse to set display camera.
4. Sequence dwell time setting
Turn the jog dial with SEQUENCE DWELL TIME MENU highlighted to enter the menu.
Diagram 7.1
78
Chapter
7