This is where your model number will be. XXX-X-XXX-X-XXX XXXXXXXXXXX This is where your serial number will be. Copy the model number here: MTD PRODUCTS INC Copy the serial number here: CLEVELAND, OHIO 44136 Figure 2 SECTION 2: CALLING CUSTOMER SUPPORT •...
SECTION 3: IMPORTANT SAFE OPERATION PRACTICES WARNING: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR LAWN MOWER. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
DO NOT: • Disengage all attachment clutches, thoroughly depress the brake pedal, and shift into neutral • Do not turn on slopes unless necessary; then, turn before attempting to start engine. slowly and gradually downhill, if possible. • Your mower is designed to cut normal residential •...
Page 5
• Replace fuel cap securely and wipe off any spilled • Grass catcher components are subject to wear, fuel before starting the engine as it may cause a damage and deterioration, which could expose fire or explosion. moving parts or allow objects to be thrown. For your safety protection,...
SECTION 4: TO THE OWNER Model 821 Tripple Rear Bagger Kit is a grass collection system designed for use on AutoDrive Garden ™ Tractors equipped with a 46-inch cutting deck only. The instructions in this manual are divided into sections. Carefully read all sections and study the illustrations to ensure proper installation and usage of this attachment.
SECTION 6: ASSEMBLY Warning: Before beginning installation, place the tractor on a firm and level surface. Place the PTO in the disengaged (OFF) position, stop the tractor engine and set the parking brake. Support Tube Rests Here Bell Washer Insert Support Tube Here Bracket Assembly Hex Flange Nut...
Page 8
ATTACHING THE CUTTING BLADES ATTACHING THE DISCHARGE CHUTE 1. Raise the deck to its highest position by placing WARNING: Cutting blades are sharp. the lift lever in the top notch on the right fender. Always protect hands by wearing heavy Raise the chute deflector on the deck.
SECTION 7: OPERATION GRASS BAG REMOVAL 1. To open the cover, simply lift up on cover. The chute tube assembly does not have to be removed. 2. To remove the grass bags, lift up on bag and unhook the frame of the bag from the support tube assembly.
Page 11
Model 821 REF. PART NO. DESCRIPTION 16606 Retainer Hook Bracket 17200A Catcher Support Bracket 17201A Bag Frame Hanger Bracket 17204 Cover Assembly Complete 17247 Support Tube Bracket 710-0473 Screw, #10-24 x .5 710-0604 Self Tapping Screw, 5/16-18 x .625 710-0751 Hex Cap Screw, 1/4-20 x .62 710-3008 Hex Cap Screw, 5/16-18 x .75...
MANUFACTURER’S LIMITED WARRANTY For TWO YEARS from the date of retail purchase Units exported out of the United States: The within the United States of America, its possessions manufacturer does not extend any warranty for and territories, the manufacturer will, at its option, products sold or exported outside of the United repair or replace, for the original purchaser, free of States of America, its possessions and territories,...