Base Unit Ringer Tone - Panasonic KX-TG2386 Operating Instructions Manual

Select the desired ringer tone by pressing [d]
4
or [B].
• The handset will ring and the ringer tone will
change. If the handset ringer volume has been
turned off, the handset will not ring (p. 17).
• You can also select the ringer tone by pressing [1]
to [7].
5 Press the soft key (Save), then press [OFF].

Base unit ringer tone

(use either the handset or the base unit)
Base Unit
Make sure the base unit is not being used.
Press VOLUME [<] or [>], then select the desired ringer tone by pressing
[1] to [7].
[1] to [3] : Bell ringer patterns
• After pressing VOLUME [<] or [>], the base unit will ring using the current ringer
tone.
• The base unit will ring and the ringer tone will change.
• To stop ringing, press [STOP].
Setting the base unit ringer tone by using the
Press [MENU].
1
Scroll to "Initial setting" by pressing [d] or [B], then press the
2
soft key (Select).
Scroll to "Set base unit" by pressing [d] or [B], then press the soft
3
key (Select).
Press the soft key (Select) at "Ringer tone".
4
Select the desired ringer tone by pressing [d] or [B].
5
• The base unit will ring and the ringer tone will change. If the base unit ringer
volume has been turned off, the base unit will not ring (p. 18).
• You can also select the ringer tone by pressing [1] to [7].
Press the soft key (Save), then press [OFF].
6
For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
[4] to [7] : Melody patterns
Handset
Ringer tone
1:Tone 1
Back Save
K
dB
L
19