Bagofparts - Craftsman 917.249650 Owner's Manual

KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS
CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly.
Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to
prevent injury to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes,
which can result in severe eye damage. Always wear safety glasses or eye
shields before starting your tractor and while mowing. We recommend a wide
vision safety mask for over the spectacles or standard safety glasses.
UNPACKING INSTRUCTIONS
CARTON CONTENTS:
• Remove all parts and packing materiats from carton.
• Fold flaps to inside of carton and turn carton upsidedown
on floor of work area. To protect grass catcher cover
during assembly place cover upsidedown on overturned
carton.
• Check carton contents against list. Be sureall parts are
there.
(2) ContainerTops
(2) Container Bottoms
(1) Upper Chute
(1) Lower Chute
(1) Support Post
(1) Mounting Bracket
(1) Cover Assembly
(1) Cover Seal
(1) Bag of Parts
(1) Owner's Manual
NOTE: Foreaseofassembly,asideofyourworkarea, layoutal{hardwareinthetoltowinggroups. Eachstepoftheassemb_y
instructions will identify the group needed for that step.
ASSEMBLY
LOCATION
REAR
MOUNTING
BRACKET
AND
SUPPORT
TUBE
TO
DRAW BAR
HARDWARE SHOWN ACTUAL SIZE
(4) Shoulder Bolt 5/16 - 18 SelfTepping _ (4) Bolt 5/16 - 18 x 3/4
©
(2) Washer 11/32 x 1-1/2 x 10 Ga.
(2) Wing Nut
©
(2) LockWasher 5116
GROUP"B"I
©
(4) Locknut 5/16-18
(1) Support Plate
NOT SHOWN FULL SIZE
SUPPORT
POST
TO
COVER
ASSEMBLY
(3) Carriage Bolt 5/16 - 18 x 3/4
©
(3) Locknut 5/16-18