Advertisement
CHECK DECK LEVELNESS
For best cutting results, mowerhousing
should be properly leveled.See
"TO
LEVEL MOWER HOUSING" in the
Service and Adjustments section of this
manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for replac-
ing motion and mower blade drive belts in
the Service and Adjustments sectoin of
this manual. Verify that the belts are rout-
ed correctly.
CHECK BRAKE SYSTEM
After you learn howto operate your trac-
tor, checkto see that the brake is properly
adjusted. See "TO ADJUST BRAKE" in
the Service and Adjustmentssection of
this manual.
,/CHECKLIST
PLEASE REVIEW THE FOLLOWING
CHECKLIST:
,/ All assembly instructions have been
completed.
,/ No remaining loose parts in carton.
,I Battery is properly prepared
and
charged. (Minimum
1 hour at 6 amps).
,/" Seat is adjusted comfortably
and
tightened securely.
,/ All tires are properly inflated. (For
shipping purposes, the tires were
overinflated
at the factory).
J
Be sure mower deck is properly leveled
side-to-side/front-to-rear
for best
cutting results. (Tires must be properly
inflated for leveling).
,/" Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
4 Check wiring. See that all connections
are still secure and wires are properly
clamped.
WHILE LEARNING
HOW TO USE YOUR
TRACTOR,
PAY EXTRA ATTENTION
TO
THE FOLLOWING
IMPORTANT
ITEMS:
,," Engine oil is at proper level.
,/' Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
¢" Become familiar with all controls - their
location and function. Operate them
before you start the engine.
,/
Be sure brake system is in safe
operating condition.
10
Advertisement
