Assembly; Unpacking & Handlebar Setup; Install Starter Rope; Assemble Grass Bag - Honda HRT216SDA Harmony II Owner's Manual

ASSEMBLY

Unpacking & Handlebar Setup
Remove all the protective cardboard from the mower, including the
piece around the handlebar.
Loosen the two knobs on the lower
LOCKING KNOB (2)
section of the handlebar enough
so you can raise the handlebar
into the mowing position. Once the
handlebar is in place, tighten the
knobs securely.

Install Starter Rope

Disconnect the spark plug cap. Pull
the flywheel brake lever back, then
LOOP
pull the starter grip toward the
starter rope loop. Release the
lever, then press the rope into the
loop. Connect the spark plug cap.

Assemble Grass Bag

(HRT models only)
Slide the grass bag frame into the
grass bag, then install the clips as
shown. Lift the rear door and
install the grass bag.
48