Adjusting Bass/Treble/Balance (Between Left And Right)/Fader (Between Front And Rear)/Defeat; Setting The Bass Control - Alpine CDE-9871R Owner's Manual

Rds mp3 cd receiver
Table of Contents

Advertisement

Order of files
Files are played back in the order that the writing software writes
them to the disc. Therefore, the playback order may not be what
is expected. Verify the writing order in the software's
documentation. The playback order of the folders and files is as
follows.
Root folder
Folder
* The folder No./folder Name will not be displayed if no file is
contained in the folder.
Terminology
Bit rate
This is the "sound" compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1
kHz, so the sound is sampled (recorded) 44,100 times per second.
The higher the sampling rate, the higher the sound quality, but also
the larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files
into the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3 files.
MP3: ID3 tag
Root folder
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
MP3 File
Sound Setting
Rotary encoder (AUDIO/LOUD)
BAND/TA
/ESC
SOURCE/
A.SEL/RTN
Adjusting Bass/Treble/Balance (Between
Left and Right)/Fader (Between Front
and Rear)/Defeat
1
Press Rotary encoder (AUDIO) repeatedly to
choose the desired mode.
Each press changes the mode as follows:
SUBW*
BASS
TREBLE
VOLUME
SUBW
Subwoofer : 0 ~ +15
Bass level: –7 ~ +7
Treble level: –7 ~ +7
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
• If no operation is performed for 5 seconds after selecting the SUBW,
BASS, TREBLE, BAL, FADER or DEFEAT mode, the unit
automatically returns to normal mode.
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting Defeat ON, previously adjusted settings of BASS
and TREBLE will return to the factory defaults.

Setting the Bass Control

You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press A.SEL/RTN repeatedly to select the BASS
mode.
BASS
TREBLE
HPF
Setting the Bass Centre Frequency
2
-1 Press BAND/TA to select the desired bass centre
frequency.
80 Hz
100 Hz
200 Hz
Emphasizes the displayed bass frequency ranges.
BAL
FADER
DEFEAT
BASS
60 Hz
80 Hz
13
-EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cde-9871rrCde-9873rb

Table of Contents