Delayed Cooking; H01D Time; Minute/Sec0Nd Timer - GE Spacemaker JVM140K04 Owner's Manual

HOW TO USE THE MINUTE/SECOND TIMER
The Minute/Second Timer
The Minute/Second Timer has 3 timing functions:
• It operates as a minute timer.
• It call be set to delay cooking.
• It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without
microwave energy.
Using a Holding Time
The Minute/Second Timer can also be used to
program a "holding time" between microwave
cooking functions. The time can range from 1 second
to 99 minutes and 99 seconds. A holding or standing
time may be found in some of your own recipes or in
a cookbook.
How to Time a 3-Minute Phone Call
Step 1: Touch MIN/SEC TIMER pad.
Step 2: Touch number pad 3 and MINUTE pad (for
3 minutes and no seconds).
Step 3: Touch START. Display shows time counting
down. The timer signals when time is up.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds,
touch either TIME COOK I & II, TEMP COOK/
HOLD or AUTO ROAST and enter cook time,
temperature or code. Touch MIN/SEC TIMER
and enter number of minutes to delay cooking.
When delaying Temp Cook/Hold or Auto Roast
cooking, be sure probe is in food. Touch START.
Timer will count down to O and cooking will begin.
How to Defrost, Hold and Time Cook
Let's say you want to defrost a frozen casserole for
15 minutes, hold for 10 minutes and then Time Cook
for 25 minutes. Here's how to do it:
Step 1: Take casserole from freezer and place in oven.
MINISEC
TIMER
Step 2: Touch TIME
Step 4: Set standing or hold
time by touching MIN/SEC
TIMER pad.
11ME DEFROST pad. 10 minutes.
DEFROST
coo I
Step 3: Touch pads 1,5 I
I &ll
and MINUTE for 15 minutes
MIN UTE defrosting
time.
(Defrosting
is automatically set on power Step 7: Touch 2, 5 and
level 3 but can be changed by cooking time.
touching the POWER LEVEL
pad and the desired power
level.)
START
Step 5: Touch 1,0 and MINUTE to hold for
Step 6: Touch TIME
COOK I &l 1 pad.
MINUTE for 25 minutes of
Step 8: Touch START. As
each function is automatically
performed, oven display shows
instructions entered and the
function. When time is up,
the oven signals and flashes
"End."
10