Lubrication Chart - Craftsman 917.273523 Owner's Manual

MAINTENANCE SCHEDULE ..___'__
PILL IN DATES _./O _kO_ _k_O #_O _q_3_ _' _40
AS vooCOMPLETE _,_ _._ _£__.÷_e _÷_ _ _÷_
REGULAR SERVICE --__ _HVlOE DATES
n n
cC_:;: TB:raek; reOsPe:::i° n _
Check Operator Presence and
T
Interlock Systems
R
Check for Loose Fasteners _ 1_5 ql_
Sharpen/Replace Mower Blades i3
T
Lubrication Chart
0 Check Battery Level
R
Clean Battery and Terminals
Check Transaxle Cooling
Check V-Belts
Check Engine Oil Level _
Change Engine Oil (with oil filter) II_l;
E Change Engine Oil (without oil filter) _1_
N Clean Air Filter
G Clean Air Screen
N_ Inspect Muffler/Spark Arrester
E Replace Oil Filter (If equipped) _
Ctean Engine Cooling Fins _
Replace Spark Plug _
Replace Air Filter Paper Cartridge t_2
Replace Fue_ Filter I_
I - Change more often when operating under a heavy load or
in high ambient temperatures
2 - Service more often when operating in dirty or dusty conditions
3 - Replace blades more often when mowing in sandy soil
4 - Not required if equipped with maintenance-free battery
5 - Tighten front axle pivot bolt to 35 tt qbs. maximum.
Do not over_ighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
0_ Spindle--
Zerk t';_"
I L.
@Front Wheel _I_
Bearing _4 /
Zerk / ,v
@Engine
g • ....
I
g_ _o
-I 0_Front Wheel
....... i I ,
....... _u_earlng Zerk
i
I 1
I 1
-' 1
019641 u
_} General Purpose Grease
(_ REFER TO Maintenance "ENGINE" SECTION
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
18