Table of Contents
Advertisement
Video Cassette
Keys
Slope Sheet
(2) Keys
Your new tractor has been assembled at the factory with exception of those parts left
unassembled
for shipping purposes.
To ensure safe and proper operation of your
tractor all parts and hardware you assemble must be tightened securely.
Use the
correct tools as necessary to insure proper tightness.
TOOLS
REQUIRED
FOR ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes you need
are listed below.
(1) 9/16" wrench
(1) Pliers
(1) 1/2" wrench
(1) Utility knife
(1) 3/4" socket with
drive ratchet
(1) Tire pressure gauge
When right or left hand is mentioned in
this manual, it means, from your point of
view, when you are in the operating
position (seated behind the steering
wheel).
TO REMOVE
TRACTOR
FROM
CARTON
UNPACK CARTON
1. Remove all accessible loose parts and
parts cartons from carton.
2. Cut, from top to bottom, along lines on
all four corners of carton, and lay
panels flat.
3. Remove mower and packing materi-
als.
4. Check for any additional loose parts or
cartons and remove.
8
Hide quick links:
Advertisement
Table of Contents
